Creality Ender 3 V2 Dog Uitstekend

Creality Ender 3 V2 Dog Uitstekend. Sure, it's far from perfect. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. I also did the bed levelling twice as i was a bit too high at first.

Beste Ender 3 Dog Stl Files For 3d Printers

I also did the bed levelling twice as i was a bit too high at first. Creality sets a new baseline for budget 3d printing. Sure, it's far from perfect. Unfortunately half of the dog's face was destroyed, and same situation at the back. Printer was working not too bad after setup but i was underextruding a bit.

So far printed in pla natural, abs grey and black and sapphire cheetah flex.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Unfortunately half of the dog's face was destroyed, and same situation at the back. Sure, it's far from perfect. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Creality sets a new baseline for budget 3d printing.. Creality sets a new baseline for budget 3d printing.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. Unfortunately half of the dog's face was destroyed, and same situation at the back. First print also took 1h09 despite the 2h name on a ender v3 2. Printer was working not too bad after setup but i was underextruding a bit. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Sure, it's far from perfect. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. I also did the bed levelling twice as i was a bit too high at first.. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.

Creality sets a new baseline for budget 3d printing... Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I also did the bed levelling twice as i was a bit too high at first. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Printer was working not too bad after setup but i was underextruding a bit. Unfortunately half of the dog's face was destroyed, and same situation at the back. First print also took 1h09 despite the 2h name on a ender v3 2. Sure, it's far from perfect. So far printed in pla natural, abs grey and black and sapphire cheetah flex.

I also did the bed levelling twice as i was a bit too high at first. Printer was working not too bad after setup but i was underextruding a bit. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. I also did the bed levelling twice as i was a bit too high at first. First print also took 1h09 despite the 2h name on a ender v3 2.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.

Unfortunately half of the dog's face was destroyed, and same situation at the back. Unfortunately half of the dog's face was destroyed, and same situation at the back... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

Creality sets a new baseline for budget 3d printing. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Unfortunately half of the dog's face was destroyed, and same situation at the back. Printer was working not too bad after setup but i was underextruding a bit. First print also took 1h09 despite the 2h name on a ender v3 2... Creality sets a new baseline for budget 3d printing.

Sure, it's far from perfect.. So far printed in pla natural, abs grey and black and sapphire cheetah flex.. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.

Unfortunately half of the dog's face was destroyed, and same situation at the back... 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model... 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit. Creality sets a new baseline for budget 3d printing. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I also did the bed levelling twice as i was a bit too high at first. First print also took 1h09 despite the 2h name on a ender v3 2. So far printed in pla natural, abs grey and black and sapphire cheetah flex. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Unfortunately half of the dog's face was destroyed, and same situation at the back. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

Unfortunately half of the dog's face was destroyed, and same situation at the back. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Unfortunately half of the dog's face was destroyed, and same situation at the back. I also did the bed levelling twice as i was a bit too high at first. First print also took 1h09 despite the 2h name on a ender v3 2. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Creality sets a new baseline for budget 3d printing. Unfortunately half of the dog's face was destroyed, and same situation at the back. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.. I also did the bed levelling twice as i was a bit too high at first.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Sure, it's far from perfect. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. So far printed in pla natural, abs grey and black and sapphire cheetah flex. I also did the bed levelling twice as i was a bit too high at first. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. First print also took 1h09 despite the 2h name on a ender v3 2. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Unfortunately half of the dog's face was destroyed, and same situation at the back. I also did the bed levelling twice as i was a bit too high at first.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. . Unfortunately half of the dog's face was destroyed, and same situation at the back.

Printer was working not too bad after setup but i was underextruding a bit. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. First print also took 1h09 despite the 2h name on a ender v3 2. Printer was working not too bad after setup but i was underextruding a bit.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to... 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Printer was working not too bad after setup but i was underextruding a bit. Creality sets a new baseline for budget 3d printing. Unfortunately half of the dog's face was destroyed, and same situation at the back. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. So far printed in pla natural, abs grey and black and sapphire cheetah flex. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.. I also did the bed levelling twice as i was a bit too high at first.

But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100... Printer was working not too bad after setup but i was underextruding a bit.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. .. Unfortunately half of the dog's face was destroyed, and same situation at the back.

Creality sets a new baseline for budget 3d printing.. I also did the bed levelling twice as i was a bit too high at first. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Sure, it's far from perfect. Unfortunately half of the dog's face was destroyed, and same situation at the back. Printer was working not too bad after setup but i was underextruding a bit. First print also took 1h09 despite the 2h name on a ender v3 2. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support... First print also took 1h09 despite the 2h name on a ender v3 2. Unfortunately half of the dog's face was destroyed, and same situation at the back. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. First print also took 1h09 despite the 2h name on a ender v3 2.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Unfortunately half of the dog's face was destroyed, and same situation at the back. First print also took 1h09 despite the 2h name on a ender v3 2. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100... I also did the bed levelling twice as i was a bit too high at first. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Sure, it's far from perfect. First print also took 1h09 despite the 2h name on a ender v3 2. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. So far printed in pla natural, abs grey and black and sapphire cheetah flex. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.. Unfortunately half of the dog's face was destroyed, and same situation at the back.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Creality sets a new baseline for budget 3d printing.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.. Unfortunately half of the dog's face was destroyed, and same situation at the back. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Creality sets a new baseline for budget 3d printing. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. So far printed in pla natural, abs grey and black and sapphire cheetah flex. First print also took 1h09 despite the 2h name on a ender v3 2. Sure, it's far from perfect. I also did the bed levelling twice as i was a bit too high at first. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to... 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. I also did the bed levelling twice as i was a bit too high at first. Unfortunately half of the dog's face was destroyed, and same situation at the back. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Sure, it's far from perfect... 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. I also did the bed levelling twice as i was a bit too high at first. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit. Creality sets a new baseline for budget 3d printing. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Sure, it's far from perfect. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

I also did the bed levelling twice as i was a bit too high at first... First print also took 1h09 despite the 2h name on a ender v3 2. Printer was working not too bad after setup but i was underextruding a bit. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Unfortunately half of the dog's face was destroyed, and same situation at the back... 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to... . Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.

I also did the bed levelling twice as i was a bit too high at first.. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Unfortunately half of the dog's face was destroyed, and same situation at the back. First print also took 1h09 despite the 2h name on a ender v3 2. I also did the bed levelling twice as i was a bit too high at first. Creality sets a new baseline for budget 3d printing. So far printed in pla natural, abs grey and black and sapphire cheetah flex.. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

Sure, it's far from perfect. Unfortunately half of the dog's face was destroyed, and same situation at the back... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.. Sure, it's far from perfect.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Unfortunately half of the dog's face was destroyed, and same situation at the back. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Printer was working not too bad after setup but i was underextruding a bit. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. First print also took 1h09 despite the 2h name on a ender v3 2. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. . 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

I also did the bed levelling twice as i was a bit too high at first. First print also took 1h09 despite the 2h name on a ender v3 2. Creality sets a new baseline for budget 3d printing. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.. I also did the bed levelling twice as i was a bit too high at first.

Creality sets a new baseline for budget 3d printing. So far printed in pla natural, abs grey and black and sapphire cheetah flex. First print also took 1h09 despite the 2h name on a ender v3 2. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.

I also did the bed levelling twice as i was a bit too high at first. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Creality sets a new baseline for budget 3d printing. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. I also did the bed levelling twice as i was a bit too high at first. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Sure, it's far from perfect. Unfortunately half of the dog's face was destroyed, and same situation at the back. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. . Printer was working not too bad after setup but i was underextruding a bit.

Sure, it's far from perfect. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Printer was working not too bad after setup but i was underextruding a bit. Sure, it's far from perfect. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. I also did the bed levelling twice as i was a bit too high at first. Creality sets a new baseline for budget 3d printing... Unfortunately half of the dog's face was destroyed, and same situation at the back.

But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.. Printer was working not too bad after setup but i was underextruding a bit. Printer was working not too bad after setup but i was underextruding a bit.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit. Sure, it's far from perfect. Unfortunately half of the dog's face was destroyed, and same situation at the back. Creality sets a new baseline for budget 3d printing. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

Creality sets a new baseline for budget 3d printing.. Sure, it's far from perfect... I also did the bed levelling twice as i was a bit too high at first.

I also did the bed levelling twice as i was a bit too high at first. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Creality sets a new baseline for budget 3d printing. Unfortunately half of the dog's face was destroyed, and same situation at the back.

Sure, it's far from perfect... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Sure, it's far from perfect. Unfortunately half of the dog's face was destroyed, and same situation at the back. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I also did the bed levelling twice as i was a bit too high at first. First print also took 1h09 despite the 2h name on a ender v3 2. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.. Printer was working not too bad after setup but i was underextruding a bit.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Creality sets a new baseline for budget 3d printing. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Printer was working not too bad after setup but i was underextruding a bit. Sure, it's far from perfect. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I also did the bed levelling twice as i was a bit too high at first. First print also took 1h09 despite the 2h name on a ender v3 2. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Unfortunately half of the dog's face was destroyed, and same situation at the back.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. So far printed in pla natural, abs grey and black and sapphire cheetah flex. First print also took 1h09 despite the 2h name on a ender v3 2. Creality sets a new baseline for budget 3d printing. Printer was working not too bad after setup but i was underextruding a bit. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100... 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.

Printer was working not too bad after setup but i was underextruding a bit. Creality sets a new baseline for budget 3d printing. Sure, it's far from perfect. First print also took 1h09 despite the 2h name on a ender v3 2.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

I also did the bed levelling twice as i was a bit too high at first. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

Sure, it's far from perfect. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.. Printer was working not too bad after setup but i was underextruding a bit.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. First print also took 1h09 despite the 2h name on a ender v3 2. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Sure, it's far from perfect. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.

So far printed in pla natural, abs grey and black and sapphire cheetah flex.. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. I also did the bed levelling twice as i was a bit too high at first. Printer was working not too bad after setup but i was underextruding a bit. First print also took 1h09 despite the 2h name on a ender v3 2.

Unfortunately half of the dog's face was destroyed, and same situation at the back. Sure, it's far from perfect. I also did the bed levelling twice as i was a bit too high at first. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Printer was working not too bad after setup but i was underextruding a bit. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.

First print also took 1h09 despite the 2h name on a ender v3 2. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Creality sets a new baseline for budget 3d printing. First print also took 1h09 despite the 2h name on a ender v3 2. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Unfortunately half of the dog's face was destroyed, and same situation at the back.. Creality sets a new baseline for budget 3d printing.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Unfortunately half of the dog's face was destroyed, and same situation at the back. First print also took 1h09 despite the 2h name on a ender v3 2. Sure, it's far from perfect.. Unfortunately half of the dog's face was destroyed, and same situation at the back.

Unfortunately half of the dog's face was destroyed, and same situation at the back... 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Printer was working not too bad after setup but i was underextruding a bit. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. I also did the bed levelling twice as i was a bit too high at first. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. First print also took 1h09 despite the 2h name on a ender v3 2. Unfortunately half of the dog's face was destroyed, and same situation at the back.. I also did the bed levelling twice as i was a bit too high at first.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

First print also took 1h09 despite the 2h name on a ender v3 2.. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. I also did the bed levelling twice as i was a bit too high at first. Creality sets a new baseline for budget 3d printing. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. So far printed in pla natural, abs grey and black and sapphire cheetah flex.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. I also did the bed levelling twice as i was a bit too high at first. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. First print also took 1h09 despite the 2h name on a ender v3 2. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Printer was working not too bad after setup but i was underextruding a bit. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Creality sets a new baseline for budget 3d printing. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

I also did the bed levelling twice as i was a bit too high at first... 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Printer was working not too bad after setup but i was underextruding a bit. Unfortunately half of the dog's face was destroyed, and same situation at the back.. Creality sets a new baseline for budget 3d printing.

First print also took 1h09 despite the 2h name on a ender v3 2. Creality sets a new baseline for budget 3d printing. Sure, it's far from perfect. Unfortunately half of the dog's face was destroyed, and same situation at the back. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. First print also took 1h09 despite the 2h name on a ender v3 2. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. I also did the bed levelling twice as i was a bit too high at first.. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model... First print also took 1h09 despite the 2h name on a ender v3 2. Sure, it's far from perfect. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I also did the bed levelling twice as i was a bit too high at first. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Creality sets a new baseline for budget 3d printing... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.